The current section contains links for downloading of SCout software and all required drivers. Thus the SCout can be equipped with the latest ammunition.

• SCout dongle v0.16
• SCout flasher v2.11
• SCout updater v1.07

• SCout dongle driver (Windows 98/ME/2000/XP/Vista/7)
• SCout flasher
• SCout updater
• Cable drivers

In case of using SCout flasher with S-Card (dongle for Smart-Clip), please perform update procedure of your dongle as it described in S-Card Update manual, using ActiveX client of Update zone at www.smart-clip.com.

SCout dongle users, please refer to the manual, provided below.

Get ready

To start working with SCout flasher the following order has to be observed.

Please follow strictly this step-by-step SCout installation procedure:

1. Download S-Card driver for your operating system. There are 4 driver packages available:

• 98/ME – to be used with OS Windows 98 or Millennium;
• 2000/XP – to be used with OS Windows 2000 or Windows XP.
• Vista – to be used with OS Windows Vista.
• win7 – to be used with OS Windows 7.

Please pay attention to select the correct one.

2. Install SCout driver.

Win98/ME:

• Install 2 library components;
• Run the driver installation.

Win2000/XP:

• Run the driver installation.

Win Vista:

• Run the driver installation.

Win7:

• When windows driver installer asks for Smart-Card drivers, locate it to the folder you extract archive downloaded from our site.

WARNING:
After driver installation has been performed PC must be restarted. Otherwise S-Card hardware will not be recognized and the dongle will not work.

3. Download and install SCout flasher.
4. Download and install SCout updater.

SCout update process

For correct installation and stable SCout operation, it is recommended to connect the dongle to the motherboard USB port directly avoiding USB HUB connection.

1. Launch SCout updater.
2. Select interface language.
3. Connect SCout dongle to PC USB port and press Next.
4. The software should detect SCout dongle and display its serial number.
5. Message "Processing SCout dongle" informs that update is in progress.
6. Operation completed.
7. SCout is updated and can be disconnected.